Product Description
Metric Zinc Plated Steel Butterfly Hose Clips
These adjustable butterfly hose clips feature zinc plated steel construction and a plastic butterfly handle for convenient hand tightening and release. They are useful for hose connections that require regular adjustment or removal.
The handle allows the clip to be adjusted without a screwdriver. Choose from six metric clamping ranges to suit the outside diameter of your hose when fitted over its connector.
Technical Specifications
| Clip Type | Adjustable butterfly hose clip |
|---|---|
| Clip Material | Steel |
| Finish | Zinc plated |
| Handle Material | Plastic |
| Adjustment Method | Hand-operated butterfly handle |
| Size Measurement | Minimum to maximum clamping diameter in millimetres |
Available Clamping Ranges
| Size Range | Minimum Diameter | Maximum Diameter |
|---|---|---|
| 8–12 mm | 8 mm | 12 mm |
| 10–16 mm | 10 mm | 16 mm |
| 25–40 mm | 25 mm | 40 mm |
| 30–45 mm | 30 mm | 45 mm |
| 32–50 mm | 32 mm | 50 mm |
| 40–60 mm | 40 mm | 60 mm |
Selecting Your Hose Clips
Measure the outside diameter of the hose at the clamping position with the hose fitted over its connector. Select a clip whose adjustment range includes that measurement. The stated range refers to the clamping diameter, not the internal bore of the hose.
Choose the required size and pack quantity from the available options. Allow enough space around the connection to turn the butterfly handle.
Fitting Guidance
Position the clip over the supported section of hose on the connector and tighten the handle until the hose is held securely. Avoid overtightening, which may damage the hose or handle. Check the connection after fitting.
