Product Description
Metric and Metric Fine Zinc Plated Steel Grease Nipples – Straight, 45° and 90°
These zinc plated steel grease nipples provide an accessible lubrication point for machinery and equipment. Choose from straight, 45° and 90° versions to suit the position of the grease port and the available access for a grease gun.
The range includes metric coarse and fine thread options in M6, M8 and M10 sizes. Match both the thread diameter and pitch to the receiving port when selecting a replacement.
Technical Specifications
| Material | Steel |
|---|---|
| Finish | Zinc plated |
| Product Type | Threaded grease nipple |
| Thread Options | Metric coarse and metric fine |
| Angle Options | Straight, 45° and 90° |
| Pack Quantities | 1, 5 or 10 |
Available Thread Sizes and Angles
| Thread Size | Nominal Thread Diameter | Thread Pitch | Thread Series | Available Angles |
|---|---|---|---|---|
| M6 x 1 | 6 mm | 1.0 mm | Metric coarse | Straight, 45° and 90° |
| M8 x 1 | 8 mm | 1.0 mm | Metric fine | Straight, 45° and 90° |
| M8 x 1.25 | 8 mm | 1.25 mm | Metric coarse | Straight, 45° and 90° |
| M10 x 1 | 10 mm | 1.0 mm | Metric fine | Straight, 45° and 90° |
How to Read the Size
For example, M8 x 1.25 x 45° identifies an 8 mm nominal thread diameter, a 1.25 mm thread pitch and a 45° angled grease nipple.
Selecting Your Grease Nipples
Select the required thread size, angle and pack quantity from the available options. Straight fittings suit direct access, while angled fittings can make lubrication points easier to reach where clearance is limited.
Check the existing fitting or equipment specification before ordering. M8 x 1 and M8 x 1.25 have different threads and are not interchangeable. Confirm that the fitting suits the receiving port and grease gun coupling.
