Product Description
200 Piece M8 A2 Stainless Steel Countersunk Socket Screw, Nut & Washer Kit
An M8 assortment containing countersunk socket screws in seven lengths, full nuts, flat washers, square section spring washers and penny repair washers. Suitable for workshop repairs and assemblies requiring a flush screw head when fitted into a matching countersink.
Product Specifications
- Material: A2 stainless steel throughout.
- Thread: M8 metric coarse, 1.25mm pitch.
- Screw type: countersunk hexagon socket, listed to DIN 7991.
- Allen key size: 5mm.
- Countersunk head angle: 90 degrees.
- Screw lengths: 12mm to 50mm, measured overall including the head.
- Total quantity: 200 pieces.
Assortment Contents
| Component | Size | Quantity |
|---|---|---|
| Countersunk socket screws | M8 x 12mm | 10 |
| Countersunk socket screws | M8 x 16mm | 10 |
| Countersunk socket screws | M8 x 20mm | 10 |
| Countersunk socket screws | M8 x 25mm | 10 |
| Countersunk socket screws | M8 x 30mm | 10 |
| Countersunk socket screws | M8 x 40mm | 10 |
| Countersunk socket screws | M8 x 50mm | 8 |
| Hexagon full nuts | M8 | 50 |
| Flat washers | M8 | 36 |
| Square section spring washers | M8 | 36 |
| Penny repair washers | M8 x 30mm outside diameter | 10 |
| Total | 200 | |
Packaging Options
- Boxed set: supplied in a clear plastic box with a clip-down lid.
- Refill pack: supplied without the box.
Fitting Advice
Use a 5mm Allen key and a suitably sized 90-degree countersink. Fit flat, spring or repair washers on the nut side as required; ordinary flat washers should not sit directly beneath the countersunk head.
Start stainless steel threads by hand and tighten steadily. Where appropriate, use a compatible anti-seize compound to help reduce the risk of thread galling.
Browse our nuts, washers and tools and accessories for additional supplies.
