Product Description
M14 Grade 12.9 Self Colour Socket Cap Screws – Fully Threaded
M14 fully threaded socket cap screws manufactured from property class 12.9 high tensile steel with a self colour finish. Featuring an M14 × 2mm metric coarse thread, they suit machinery, tooling and mechanical assemblies requiring a high strength metric fastener.
The cylindrical socket cap head takes a 12mm Allen key or hexagon driver bit. The fully threaded design allows installation into a matching tapped hole or use with a suitable M14 nut.
Specifications
| Thread size | M14 |
|---|---|
| Nominal diameter | 14mm |
| Thread pitch | 2mm – metric coarse |
| Thread direction | Right hand |
| Material | High tensile steel |
| Property class | 12.9 |
| Finish | Self colour |
| Thread coverage | Fully threaded |
| Head style | Cylindrical socket cap head |
| Drive size | 12mm hexagon socket / Allen key |
| Head diameter | 21mm maximum |
| Head height | 14mm maximum |
| Listed lengths | 30, 35, 40, 45, 50 and 55mm |
| Length measurement | Measured from beneath the head to the tip |
| Pack quantities | Select from the available product options |
Key Features
- Property class 12.9 high tensile steel construction.
- Fully threaded M14 × 2mm metric coarse thread.
- Socket cap head with a 12mm internal hexagon drive.
- Six listed lengths from 30mm to 55mm.
- Suitable for matching tapped holes or compatible nuts.
Typical Applications
Suitable for machine building, tooling, equipment maintenance, brackets and fixtures where a fully threaded M14 high tensile socket cap screw is specified.
Installation
Use a correctly fitting 12mm Allen key or hexagon driver bit. Ensure sufficient thread engagement and check that the screw cannot bottom out in a blind hole before the joint is clamped.
Apply a tightening torque appropriate to the fastener, mating material, lubrication and joint design. Self colour steel requires suitable protection when exposed to moisture.
Ordering
Select your required length and pack quantity from the available product options. Screw length excludes the head height.
Standards
- DIN 912 / ISO 4762 – socket cap head dimensional pattern.
- ISO 898-1 – mechanical properties, property class 12.9.
