Product Description
5/8" UNF Grade 8 Yellow Zinc Part Threaded Hex Bolts
These 5/8"-18 UNF hexagon head bolts are manufactured from Grade 8 high tensile steel with a yellow zinc plated finish. Each bolt is part threaded, providing a plain shank beneath the head for assemblies requiring an unthreaded section through the components being joined.
The fine UNF thread suits compatible imperial nuts and tapped holes. The hexagon head takes a 15/16" spanner or socket, while the zinc plating provides a protective finish to help resist corrosion.
Specifications
| Thread diameter | 5/8" nominal (15.875mm) |
|---|---|
| Thread form | UNF – Unified National Fine |
| Thread size | 5/8"-18 UNF – 18 threads per inch |
| Material | High tensile steel |
| Strength grade | Grade 8 |
| Finish | Yellow zinc plated |
| Head style | Hexagon head |
| Spanner size | 15/16" across flats |
| Thread coverage | Part threaded, with a plain shank |
| Length measurement | Measured from beneath the head to the end of the bolt |
Key Features
- Grade 8 high tensile steel for assemblies specifying this strength grade.
- 5/8"-18 UNF fine thread for matching imperial fasteners.
- Part threaded construction with an unthreaded shank.
- Yellow zinc plated finish for added corrosion resistance.
- Hexagon head for tightening with a 15/16" spanner or socket.
Typical Applications
Suitable for machinery maintenance, engineering assemblies, automotive repairs and equipment restoration where 5/8"-18 UNF Grade 8 part threaded bolts are specified.
Installation
Use compatible 5/8"-18 UNF nuts of an appropriate strength grade or a matching tapped hole. Select a bolt length that provides the required shank position and thread engagement. Tighten to the equipment manufacturer's specification, accounting for the plated finish and any lubrication used.
Ordering
Select your required bolt length and pack quantity from the available options. Bolt length excludes the head. Check the required threaded and plain shank lengths before ordering, as these vary with bolt length.
Standards
Grade 8 strength designation: SAE J429. Imperial hexagon head bolt dimensional reference: ASME B18.2.1.