Product Description
BA Table 1 A2 Stainless Steel Flat Washers
A2 stainless steel flat washers in the traditional Table 1 BA pattern, for use with matching British Association screws and bolts. The flat bearing surface helps distribute the fastening load beneath a screw head or nut.
Specifications
| Product type | Flat washer |
|---|---|
| Material | A2 stainless steel |
| Pattern | Table 1 BA |
| Fastener size system | BA – British Association |
| Available sizes | 0BA, 2BA, 6BA and 8BA |
Available Sizes and Dimensions
| Nominal BA Size | Outside Diameter | Thickness |
|---|---|---|
| 0BA | 12.6mm | 0.9mm |
| 2BA | 9.8mm | 0.8mm |
| 6BA | 5.9mm | 0.8mm |
| 8BA | 4.9mm | 0.6mm |
Dimensions are approximate guides. The BA designation identifies the matching fastener size, rather than a measured bore diameter.
Key Features
- A2 stainless steel construction for corrosion resistance.
- Traditional Table 1 BA washer pattern.
- Four sizes for assembly, maintenance and restoration work.
Selection and Installation
Select the washer to match the BA screw or bolt. Check bore clearance, outside diameter and thickness where space is limited or dimensions are critical.
Pack Sizes
Available in packs of 5, 10, 20, 50, 100, 250, 500 or 1000. Select the required size and quantity from the options above.
Standards and Pattern
Table 1 BA pattern. Exact compliance with a specific BS, DIN or ISO manufacturing standard has not been verified for this range.
| A | B | C |
| 8BA | 4.9MM | 0.6MM |
| 6BA | 5.9MM | 0.8MM |
| 2BA | 9.8MM | 0.8MM |
| 0BA | 12.6MM | 0.9MM |
Please Note: Specifications given are intended as a guide only. If critical to your project please check with us first.
