Product Description
No.10 A2 stainless steel hex flange head self drilling Tek screws manufactured to DIN 7504K style.
These self drilling screws feature a hexagon flange head and drill point, allowing them to drill and fasten in one operation in suitable materials. The integral flange provides a wider bearing surface than a plain hex head, helping to spread the clamping load under the head.
- Screw size: No.10
- Approximate screw diameter: 4.8mm
- Head style: Hexagon flange head
- Drive type: External hexagon
- Point type: Self drilling / Tek point
- Material: A2 stainless steel
- Standard / designation: DIN 7504K style
- Suitable materials listed: Wood, plastic and aluminium
- Available lengths: 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2" and 2"
- Approximate metric lengths: 13mm, 16mm, 19mm, 25mm, 32mm, 38mm and 50mm
- Pack sizes available: 5 to 1000
| Screw Size | Approx. Diameter | Imperial Length | Approx. Metric Length | Head Style | Material | Standard |
|---|---|---|---|---|---|---|
| No.10 | 4.8mm | 1/2" | 13mm | Hex Flange | A2 Stainless Steel | DIN 7504K Style |
| No.10 | 4.8mm | 5/8" | 16mm | Hex Flange | A2 Stainless Steel | DIN 7504K Style |
| No.10 | 4.8mm | 3/4" | 19mm | Hex Flange | A2 Stainless Steel | DIN 7504K Style |
| No.10 | 4.8mm | 1" | 25mm | Hex Flange | A2 Stainless Steel | DIN 7504K Style |
| No.10 | 4.8mm | 1 1/4" | 32mm | Hex Flange | A2 Stainless Steel | DIN 7504K Style |
| No.10 | 4.8mm | 1 1/2" | 38mm | Hex Flange | A2 Stainless Steel | DIN 7504K Style |
| No.10 | 4.8mm | 2" | 50mm | Hex Flange | A2 Stainless Steel | DIN 7504K Style |
These screws are suitable for fixing into compatible wood, plastic and aluminium applications. The product page specifically notes that these screws will not self drill steel.
A2 stainless steel provides good corrosion resistance for general indoor and outdoor applications. For marine, coastal or highly corrosive environments, A4 stainless steel may be more suitable.
Use the correct hex driver or socket to avoid damaging the head. A suitable pilot hole may still be required depending on the material, thickness and application.
Please note: Specifications are intended as a guide only. If dimensions are critical to your project, please check with us before ordering.
