Product Description
No.10 Zinc Plated Steel Phillips Flange Head Self Drilling Screws DIN 7504
No.10 Phillips flange head self drilling screws for fastening wood, plastic and other softer materials to suitable steel. The wide flange head provides a larger bearing surface to support the material being secured.
Manufactured from zinc plated steel, these screws feature a drill point for installation without a separate pilot hole in suitable applications. Select the required length and pack size from the available options.
Technical Specifications
| Screw Size | No.10 |
|---|---|
| Nominal Thread Diameter | 4.8mm |
| Material | Steel |
| Finish | Zinc plated |
| Head Style | Flange head |
| Drive Type | Phillips |
| Point Type | Self drilling |
| Standard Reference | DIN 7504 |
| Head Diameter | 12.5mm |
| Head Height | 3mm |
Available Lengths
| Screw Diameter | Length | Approximate Imperial Length |
|---|---|---|
| 4.8mm | 16mm | 5/8 inch |
| 4.8mm | 19mm | 3/4 inch |
| 4.8mm | 25mm | 1 inch |
Installation
Use a correctly fitting Phillips driver and select a screw length suited to the combined material thickness. Suitability for self drilling depends on the steel thickness and the screw's drilling capacity. Avoid overtightening against softer materials.
Please note: Dimensions are approximate and provided as a guide. Please contact us before ordering if measurements are critical to your application.
Browse Related Categories
| A | B | C | D | E | F | G | H |
| 4.8mm | No10 | 16mm | 5/8" | 12.5mm | 0.49" | 3mm | 0.11" |
| 4.8mm | No10 | 19mm | 3/4" | 12.5mm | 0.49" | 3mm | 0.11" |
| 4.8mm | No10 | 25mm | 1" | 12.5mm | 0.49" | 3mm | 0.11" |
Please Note: Specifications given are intended as a guide only. If critical to your project please check with us first.
