Product Description
Metric Yellow Nylon Semi Rigid Tubing – 1 Metre Length
This yellow nylon tubing has a semi rigid construction and is supplied in 1 metre lengths. Available in six outside diameters, it is manufactured to DIN 73378 and BS 5409 and is listed as suitable for oil, petrol and diesel, subject to the requirements of the system.
Each size has a nominal 1 mm wall thickness. The yellow colour helps distinguish the tubing when routing or identifying lines within an assembly.
Technical Specifications
| Material | Nylon |
|---|---|
| Construction | Semi rigid tubing |
| Colour | Yellow |
| Listed Length | 1 metre |
| Size Measurement | Outside diameter in millimetres |
| Nominal Wall Thickness | 1 mm |
| Standards | DIN 73378 and BS 5409 |
Available Sizes and Dimensions
Internal diameters are calculated by subtracting twice the nominal wall thickness from the outside diameter. All dimensions below are in millimetres.
| Outside Diameter | Wall Thickness | Calculated Internal Diameter |
|---|---|---|
| 4 | 1 | 2 |
| 5 | 1 | 3 |
| 6 | 1 | 4 |
| 8 | 1 | 6 |
| 10 | 1 | 8 |
| 12.7 | 1 | 10.7 |
Selecting Your Tubing
Select the outside diameter to match your fittings and choose the required pack option. The stated size refers to the outside diameter, not the internal bore. If you require a continuous length longer than 1 metre, please contact us before ordering.
Match the tubing and fittings to the fluid, working pressure and temperature of the system. For fuel applications, confirm compatibility with the specific fuel blend and operating conditions.
Preparation and Fitting
Cut the tubing square with a suitable tube cutter and keep the ends clean. Use fittings designed for the selected nylon tube size and follow their assembly instructions.
Route the tube without sharp bends or kinks, support it as required and protect it from abrasion and excessive heat.
