Product Description
Metric Fine Zinc Plated 8.8 High Tensile Threaded Bar – 1/3 Metre Length
Metric fine and extra fine pitch threaded bar manufactured from property class 8.8 high tensile steel with a bright zinc plated finish. Supplied in individual one-third metre lengths, this fully threaded bar is suitable for making short studs, securing components and completing repairs requiring a matching metric fine thread.
Also known as threaded rod, studding or allthread, the continuous thread allows nuts to be positioned along the bar for clamping and adjustment. Each length can be cut down further to suit the assembly.
Specifications
| Product type | Fully threaded bar / studding |
|---|---|
| Material | High tensile steel |
| Property class | 8.8 |
| Finish | Bright zinc plated |
| Thread type | Metric fine and extra fine, depending on the selected size |
| Thread coverage | Fully threaded |
| Nominal length per bar | 1/3 metre — approximately 333mm |
Available Sizes and Thread Pitches
| Thread size | Nominal diameter | Thread pitch |
|---|---|---|
| M8 × 1 | 8mm | 1.00mm |
| M10 × 1 | 10mm | 1.00mm |
| M10 × 1.25 | 10mm | 1.25mm |
| M12 × 1.25 | 12mm | 1.25mm |
| M12 × 1.5 | 12mm | 1.50mm |
| M14 × 1.5 | 14mm | 1.50mm |
| M16 × 1.5 | 16mm | 1.50mm |
Pack Quantities
Available in quantities of 1, 5 or 10 bars. Each bar is supplied as a separate one-third metre length. Select the required thread size and quantity from the options above.
Typical Applications
- Making short studs cut to the required length.
- Clamping fixtures and mechanical assemblies.
- Machinery maintenance and repairs.
- Replacing studding with matching metric fine threads.
Fitting Information
Match both the diameter and thread pitch to the mating nut or tapped hole. Standard metric coarse nuts will not fit these fine pitch threads. Select nuts of a suitable property class for the assembly.
After cutting, deburr the end and check that a matching nut runs freely onto the thread. Cutting exposes the steel beneath the zinc coating, so protect the cut end where corrosion resistance is required.
