Product Description
M10 A2 Stainless Steel Double End Studs – DIN 938
Please note small threaded end is not measured in length (10mm)
M10 DIN 938 double end studs manufactured from A2 stainless steel, with a metric coarse thread and 1.5mm pitch. Each stud features two threaded ends separated by a plain central shank, for securing components to a tapped base or housing.
The short 10mm threaded end screws into the tapped component, leaving the opposite end available for a matching M10 nut. Covers, brackets and other attached parts can then be removed while the stud remains fitted.
Key Features
- A2 stainless steel: corrosion resistance for general engineering, equipment assembly and maintenance.
- DIN 938 design: double end stud with a nominal screw-in thread length equal to the thread diameter.
- M10 metric coarse thread: 10mm nominal diameter with a 1.5mm pitch.
- 10mm screw-in end: short threaded section for fitting into a matching tapped hole.
- Plain central shank: unthreaded section between the two threaded ends.
- Choice of lengths: 30mm, 35mm, 40mm, 45mm, 50mm, 55mm and 60mm nominal lengths.
Technical Specifications
| Product Type | Double end threaded stud |
|---|---|
| Standard | DIN 938 |
| Material | A2 stainless steel |
| Thread Size | M10 |
| Thread Pitch | 1.50mm – metric coarse |
| Nominal Screw-in Thread Length | 10mm |
Length Guide
The selected length does not include the short 10mm screw-in end. It covers the plain shank and the threaded section used for the nut. Add 10mm to the selected length to calculate the nominal overall length.
| Selected Size | Screw-in End | Nominal Overall Length |
|---|---|---|
| M10 x 30mm | 10mm | 40mm |
| M10 x 35mm | 10mm | 45mm |
| M10 x 40mm | 10mm | 50mm |
| M10 x 45mm | 10mm | 55mm |
| M10 x 50mm | 10mm | 60mm |
| M10 x 55mm | 10mm | 65mm |
| M10 x 60mm | 10mm | 70mm |
Typical Applications
Used for securing machinery covers, mounting brackets, assembling housings and fastening removable components where an M10 DIN 938 stud is specified.
Choosing the Correct Stud
Check that the tapped hole and mating nut both have an M10 x 1.5mm thread. Choose a stud length that accommodates the fitted component, any washer and sufficient nut engagement.
Browse our nuts and washers to complete your assembly. For help identifying metric threads, visit our Thread Data Guide.
Ordering: select your required stud length and pack quantity from the available options.
