Product Description
Zinc Plated Pan Pozi Self Tapping Screw Assortment – 680 Pieces
This 680-piece assortment contains zinc plated steel pan head Pozi self tapping screws in No.2, No.4 and No.6 sizes. Nine diameter and length combinations provide a practical selection for small fixings, repairs and general assembly.
The raised pan head provides a bearing surface above the material, while the Pozi recess accepts a matching Pozidriv screwdriver or bit. Supplied in a clear plastic storage box with a clip-down lid.
Product Specifications
- Material: Steel
- Finish: Zinc plated
- Head type: Pan head
- Drive: Pozi / Pozidriv
- Thread type: Self tapping
- Screw sizes: No.2, No.4 and No.6
- Nominal diameters: 2.2mm, 2.9mm and 3.5mm
- Total quantity: 680 screws across nine sizes
- Packaging: Clear plastic box with clip-down lid
Sizes Included
| Gauge | Nominal Diameter | Imperial Length | Listed Metric Length |
|---|---|---|---|
| No.2 | 2.2mm | 3/16" | 5mm |
| No.2 | 2.2mm | 3/8" | 9.5mm |
| No.2 | 2.2mm | 1/2" | 13mm |
| No.4 | 2.9mm | 1/4" | 6mm |
| No.4 | 2.9mm | 1/2" | 13mm |
| No.4 | 2.9mm | 3/4" | 19mm |
| No.6 | 3.5mm | 3/8" | 9.5mm |
| No.6 | 3.5mm | 5/8" | 16mm |
| No.6 | 3.5mm | 1" | 25mm |
Head Dimensions
Approximate head dimensions are shown below. Dimensions are provided as a guide.
| Screw Size | Head Diameter | Head Height |
|---|---|---|
| No.2 / 2.2mm | 4.2mm | 1.8mm |
| No.4 / 2.9mm | 5.6mm | 2.2mm |
| No.6 / 3.5mm | 6.9mm | 2.6mm |
Installation and Measuring
Prepare a pilot hole suited to the screw diameter and material being fastened. Use a correctly fitting Pozidriv screwdriver or bit and tighten carefully to avoid stripping the mating thread.
Pan head screw length is measured from beneath the head to the tip. Listed metric lengths are approximate imperial equivalents.
