Product Description
M10 Yellow Zinc Plated Steel Sleeve Anchor Bolts
M10 steel sleeve anchor bolts with a yellow zinc passivated finish. These mechanical expansion fixings secure fixtures by expanding the sleeve against the surrounding base material as the anchor is tightened.
Product Specifications
Size - M10 x 60
Drill diameter - 12mm
Thread Diameter M10/10mm
Max Fixture Thickness - 5mm
Anchor Length - 60mm
Embedment Depth - 50mm
Minimum Hole Depth - 65mm
Tightening Torque - 35NM
Size - M10 x 75
Drill diameter - 12mm
Thread Diameter M10/10mm
Max Fixture Thickness - 20mm
Anchor Length - 75mm
Embedment Depth - 50mm
Minimum Hole Depth - 65mm
Tightening Torque - 35NM
Size - M10 x 60
Drill diameter - 12mm
Thread Diameter M10/10mm
Max Fixture Thickness - 40mm
Anchor Length - 95mm
Embedment Depth - 50mm
Minimum Hole Depth - 65mm
Tightening Torque - 35NM
Size - M10 x 125
Drill diameter - 12mm
Thread Diameter M10/10mm
Max Fixture Thickness - 65mm
Anchor Length - 115mm
Embedment Depth - 50mm
Minimum Hole Depth - 65mm
Tightening Torque - 35NM
Key Features
- Mechanical sleeve expansion fixing.
- Yellow zinc passivated steel construction.
- Choice of four anchor lengths.
- 12mm drill diameter across the range.
Selection and Installation
Choose the anchor length to suit the fixture thickness and required embedment. Drill and clean the hole, then install in accordance with the instructions for the supplied anchor.
Base-material suitability and permissible loads must match the anchor specification and application.
Select your required length and pack quantity before ordering.
