Product Description
No.10 zinc plated steel pozi flange head self tapping screws, manufactured from steel with a zinc plated finish for general corrosion resistance. These Type AB self tappers are designed to form their own thread in suitable pre-drilled holes and are commonly used for sheet metal, plastic, trim, light fabrication and general assembly work.
The flange head provides a wider bearing surface than a standard pan head, helping to spread load and reduce the need for a separate washer in many applications. The Pozi drive gives good tool engagement for quick installation.
These screws are No.10 gauge, approximately 4.8mm diameter, and are available in imperial lengths from 3/8" to 1". This product type is commonly listed to BS 4174.
- No.10 self tapping screws
- Pozi flange head
- Zinc plated steel
- Type AB self tapping thread
- BS 4174 style
- Approx. 4.8mm diameter
- Lengths from 3/8" to 1"
- Available in small and bulk pack sizes
Also known as flange head self tappers, pozi flange self tapping screws, No.10 flanged self tappers and BS 4174 self tapping screws.
| A | B | C | D | E | F | G | H |
| No.10 | 4.8mm | 1/2" | 13mm | 11.2mm | 0.44" | 3mm | 0.12" |
| No.10 | 4.8mm | 3/4" | 19mm | 11.2mm | 0.44" | 3mm | 0.12" |
| No.10 | 4.8mm | 3/8" | 9.5mm | 11.2mm | 0.44" | 3mm | 0.12" |
| No.10 | 4.8mm | 5/8" | 16mm | 11.2mm | 0.44" | 3mm | 0.12" |
| No.10 | 4.8mm | 1" | 25mm | 11.2mm | 0.44" | 3mm | 0.12" |
Please Note: Specifications given are intended as a guide only. If critical to your project please check with us first.
