Product Description
M6 metric A2 stainless steel mushroom slotted head machine screws with a standard metric coarse thread. These screws are manufactured from A2 stainless steel, giving good corrosion resistance for general indoor, outdoor and damp applications.
The large mushroom head gives a wide, low-profile raised finish, helping to spread load across the fixing surface. The traditional slotted drive is suitable for general assembly, restoration work, panels, brackets, furniture, fittings, machinery and applications where a plain slot drive is preferred.
These M6 machine screws have a standard metric coarse thread and are available in lengths from 12mm to 80mm. The head diameter is approximately 15mm. A nut or tapped hole is required for installation.
- M6 metric machine screws
- A2 stainless steel
- Mushroom slotted head
- Standard metric coarse thread
- Approx. 15mm head diameter
- Lengths from 12mm to 80mm
- Suitable for panels, brackets, fittings, machinery and general assembly
- Available in small and bulk pack sizes
Also known as mushroom head machine screws, slotted machine screws, truss head screws, large head machine screws, dome head machine screws and A2 stainless machine screws.
| A | B | C | D |
| 6mm | 50mm | 15mm | 1 |
| 6mm | 80mm | 15mm | 1 |
| 6mm | 60mm | 15mm | 1 |
| 6mm | 40mm | 15mm | 1 |
| 6mm | 35mm | 15mm | 1 |
| 6mm | 30mm | 15mm | 1 |
| 6mm | 25mm | 15mm | 1 |
| 6mm | 20mm | 15mm | 1 |
| 6mm | 16mm | 15mm | 1 |
| 6mm | 12mm | 15mm | 1 |
Please Note: Specifications given are intended as a guide only. If critical to your project please check with us first.
