Product Description
UNC Zinc Plated Steel Hexagon Threaded Bar Connector Nuts
UNC hexagon connector nuts manufactured from zinc plated steel for joining matching threaded rod, studding and threaded components. Also known as coupling nuts or extension nuts, they feature an internal thread running through the full length of the connector.
The hexagon exterior allows the connector to be held with a suitable spanner during assembly. Available in six listed UNC thread sizes from No.10-24 to 1/2"-13.
Specifications
| Product type | Threaded bar connector / coupling nut |
|---|---|
| Material | Steel |
| Finish | Zinc plated |
| External profile | Hexagon |
| Thread type | Unified National Coarse, right hand |
| Internal thread | Through-threaded bore |
| Pack quantities | Select from the available product options |
Thread Sizes and Connector Lengths
| UNC Thread Size | Threads Per Inch | Connector Length | Metric Length Equivalent |
|---|---|---|---|
| No.10-24 | 24 TPI | 3/4" | 19.05mm |
| 1/4"-20 | 20 TPI | 1¾" | 44.45mm |
| 5/16"-18 | 18 TPI | 1¾" | 44.45mm |
| 3/8"-16 | 16 TPI | 1¾" | 44.45mm |
| 7/16"-14 | 14 TPI | 1¾" | 44.45mm |
| 1/2"-13 | 13 TPI | 1¾" | 44.45mm |
Key Features
- Connects components with matching UNC threads.
- Internal thread passes through the complete connector.
- Hexagon exterior for spanner engagement.
- Zinc plated steel for corrosion protection.
- Six listed imperial thread sizes.
Typical Applications
Suitable for extending threaded rod, joining studding and assembling brackets, fixtures and general workshop components with matching UNC threads.
Installation
Check both the thread diameter and TPI before fitting. Start each threaded component by hand and provide sufficient engagement from both ends. Hold the connector with a correctly fitting spanner where required.
Use thread engagement and tightening guidance appropriate to the assembly. Connector length alone does not establish the strength or load capacity of the finished joint.
Ordering
Select the required UNC thread size and pack quantity. The listed length is the overall connector length. Each pack contains the selected size.
Standards
ASME B1.1 – Unified inch screw threads. No specific DIN, ISO or BS dimensional product standard has been verified for these connectors.