Product Description
3.2mm black sealed dome head pop rivets with an aluminium body and steel mandrel. These closed-end blind rivets are designed for fastening sheet metal, panels, trim and general assemblies where access is only available from one side.
The sealed / closed-end body helps reduce the passage of moisture, air and dirt through the rivet body compared with open-end rivets, making them useful for automotive, bodywork, fabrication, repair and panel fixing applications. The black finish gives a neater appearance on dark panels or visible fixing points.
These 3.2mm aluminium / steel sealed dome head pop rivets are available in 8mm and 11mm lengths, with grip ranges of approximately 1.5mm to 3mm and 4mm to 6mm. The suitable standard reference for aluminium / steel closed-end dome head blind rivets is ISO 15973 / DIN EN ISO 15973.
- 3.2mm sealed dome head pop rivets
- Aluminium body with steel mandrel
- Black finish
- Closed-end / sealed blind rivet design
- Dome head / protruding head style
- Recommended hole size: 3.3mm
- Head diameter: 6.7mm
- Lengths available: 8mm and 11mm
- Grip ranges approximately 1.5mm to 3mm and 4mm to 6mm
- ISO 15973 / DIN EN ISO 15973 style
- Available in small and bulk pack sizes
Also known as black sealed pop rivets, closed-end blind rivets, 3.2mm dome head rivets, aluminium steel sealed rivets, black blind rivets and waterproof style pop rivets.
| A | B | C | D | E | F |
| 3.2mm | 8mm | 6.7mm | 1.5mm | 3mm | 3.3mm |
| 3.2mm | 11mm | 6.7mm | 4mm | 6mm | 3.3mm |
Please Note: Specifications given are intended as a guide only. If critical to your project please check with us first.
