Product Description
3.2mm A2 stainless steel sealed dome head blind rivets with an A2 stainless steel body and mandrel.
These closed-end pop rivets are designed to provide a more enclosed fixing than standard open-end blind rivets, helping to restrict the passage of moisture, air and debris through the centre of the rivet. They can be installed from one side of the workpiece using a suitable blind rivet tool.
- Rivet diameter: 3.2mm
- Rivet type: Sealed / closed-end blind rivet
- Head style: Dome head / protruding head
- Body material: A2 stainless steel
- Mandrel material: A2 stainless steel
- Body lengths available: 6mm, 8mm, 9.5mm and 12mm
- Approximate head diameter: 6.7mm
- Recommended hole diameter: 3.3mm
- Grip ranges available: 0.5mm to 6.5mm, depending on length
- Blind installation from one side of the workpiece
- Pack sizes available: 1 to 1000
To select the correct rivet, measure the combined thickness of the materials being joined and choose a grip range that includes that measurement. Drill or prepare a clean 3.3mm mounting hole and install the rivet with a suitable blind rivet gun.
Sealed blind rivets can help improve resistance to moisture and debris penetration, but the finished joint should not be assumed to be fully watertight or pressure-tight unless separately tested for the intended application.
Please note: Specifications are intended as a guide only. If dimensions are critical to your project, please check with us before ordering.
| A | B | C | D | E | F |
| 3.2mm | 12mm | 6.7mm | 5mm | 6.5mm | 3.3mm |
| 3.2mm | 6mm | 6.7mm | 0.5mm | 1.5mm | 3.3mm |
| 3.2mm | 8mm | 6.7mm | 1.5mm | 3mm | 3.3mm |
| 3.2mm | 9.5mm | 6.7mm | 3mm | 5mm | 3.3mm |
Please Note: Specifications given are intended as a guide only. If critical to your project please check with us first.
