Product Description
Plastic wall plugs, commonly known as Rawl plugs, for use with wood screws and chipboard screws in masonry, brick, block and other suitable solid building materials.
These general-purpose plastic plugs expand inside the drilled hole as the screw is tightened, helping to create a secure fixing point where a screw cannot be driven directly into the wall material. Available in sizes to suit screw numbers No.4 & No.6, No.7 & No.8 and No.10 & No.12.
- Product type: Plastic wall plug / Rawl plug
- Material: Plastic
- Colours available: Yellow, red and brown
- For screw sizes: No.4 & No.6, No.7 & No.8, No.10 & No.12
- Suitable for use with compatible wood screws and chipboard screws
- Commonly used in masonry, brick, block and other suitable solid materials
- Pack sizes available: 1 to 1000
| Plug Colour | For Screw Sizes | Fixing Type | Material | Typical Use |
|---|---|---|---|---|
| Yellow | No.4 & No.6 | Wall Plug / Rawl Plug | Plastic | Light-duty fixings |
| Red | No.7 & No.8 | Wall Plug / Rawl Plug | Plastic | General-purpose fixings |
| Brown | No.10 & No.12 | Wall Plug / Rawl Plug | Plastic | Heavier general-purpose fixings |
For best results, drill a clean hole to the correct diameter and depth for the selected plug, remove loose dust and debris, then insert the plug fully before fitting the screw.
The correct drill size and screw length will depend on the plug selected, wall material, fixture thickness and load being supported. Always ensure the fixing is suitable for the application before use.
Please note: Wall plugs are not suitable for every wall type. Specialist fixings may be required for plasterboard, hollow walls, aerated block, crumbly masonry or high-load applications.
Please note: Specifications are intended as a guide only. If dimensions are critical to your project, please check with us before ordering.
