Product Description
No.4 A2 Stainless-Steel Raised Countersunk Slotted Woodscrews – DIN 95
These No.4 raised countersunk slotted woodscrews are manufactured from A2 stainless steel to DIN 95. Available in 3/4", 1" and 1 1/4" imperial lengths, they provide a corrosion-resistant and decorative fastening solution for detailed woodworking, furniture, restoration and timber hardware.
The raised countersunk head combines a countersunk bearing surface with a gently rounded top. This allows the screw to seat neatly into a countersunk hole while leaving a decorative raised finish above the adjoining surface. The traditional slotted drive makes these screws particularly suitable for restoration work and period-style fittings.
Product Details
- Screw gauge: No.4 imperial gauge
- Available lengths: 3/4", 1" and 1 1/4"
- Material: A2 stainless steel
- Finish: Natural stainless-steel finish
- Head style: Raised countersunk
- Alternative head description: Oval head
- Drive type: Slotted
- Thread type: Wood-screw thread
- Standard: DIN 95
The stated length of a raised countersunk woodscrew is measured over the complete screw, including the raised head.
Available Pack Sizes
Available in packs of 1, 5, 10, 20, 50, 100, 250, 500 and 1000. Available combinations may depend on the selected screw length.
Features and Benefits
- Manufactured to DIN 95
- A2 stainless steel provides good general corrosion resistance
- Small No.4 gauge for detailed and light woodworking
- Decorative raised countersunk head provides an attractive finish
- Countersunk underside seats neatly into a prepared countersink
- Traditional slotted drive complements period-style fittings
- Pointed end helps the screw start in timber
- Wood-screw thread provides effective engagement in timber
- Available in three imperial lengths
Typical Applications
- Traditional woodworking and joinery
- Furniture and cabinet assembly
- Restoration and conservation projects
- Fixing small hinges, catches and decorative hardware
- Model making and craft projects
- Applications requiring a decorative raised screw head
Installation Guidance
- Use a correctly fitting flat-bladed screwdriver to avoid damaging the slot.
- Drill a suitable pilot hole, particularly in hardwood or close to an edge.
- Use a clearance hole through the upper component where a tight joint is required.
- Prepare a suitable countersink for the underside of the raised head.
- Do not attempt to drive the rounded top completely flush with the surface.
- Avoid excessive tightening, as stainless steel is softer than hardened carbon steel.
- Use clean installation tools to reduce contamination of the stainless-steel surface.
Corrosion guidance: A2 stainless steel provides good resistance in many indoor and mildly exposed outdoor environments. For marine, coastal, swimming-pool, chemical or other chloride-rich conditions, A4 stainless steel may be more appropriate.
DIN 95 covers general-purpose slotted raised-countersunk wood screws for applications that do not require structural or construction approval. These screws should not be described as structural fasteners unless separate load-performance certification is available for the exact product.
Browse our raised countersunk slotted woodscrews or view the complete wood-screw range .
| A | B | C | D | E | F | G | H |
| No.4 | 2.9mm | 1 1/4" | 35mm | 13/64 | 5.2mm | 3/32 | 2.5mm |
| No.4 | 3mm | 1" | 25mm | 1/4 | 5.6mm | 3/32 | 2.5mm |
| No.4 | 3mm | 3/4" | 20mm | 1/4 | 5.6mm | 3/32 | 2.5mm |
Please Note: Specifications given are intended as a guide only. If critical to your project please check with us first.
