Product Description
4mm Aluminium/Steel Dome Head Peeled Pop Rivets
4mm peeled pop rivets manufactured with an aluminium rivet body and zinc-plated steel break mandrel. Peel-type blind rivets are designed for fastening soft, brittle or low-density materials where a conventional pop rivet may pull through the rear surface.
During installation, the aluminium body splits and peels into separate legs on the blind side of the joint. This produces a larger rear bearing area that helps spread the clamping load across the material.
Product Features
- Nominal rivet diameter: 4mm
- Rivet type: peeled or peel-type blind rivet
- Head style: dome or protruding head
- Body material: aluminium
- Mandrel material: zinc-plated steel
- Body lengths from 12mm to 25mm
- Grip ranges from 5mm to 20mm
- Head diameter: approximately 8mm
- Recommended hole diameter: approximately 4.1mm
- Installed from one side of the workpiece
- Available in small and bulk pack quantities
Suitable Applications
- Plastic panels and components
- Wood and timber products
- Composite and laminated materials
- Insulation and lightweight boards
- Automotive trim and interior panels
- Caravans, trailers and vehicle bodywork
- Signage and general fabrication
These peeled rivets are designed to spread the load over a larger blind-side area. They should not be treated as sealed, waterproof or structural rivets unless separately confirmed as suitable for the application.
Available Pack Sizes
Choose from packs of 5, 10, 20, 50, 100, 250, 500 or 1,000 rivets. Select the required rivet length and pack quantity from the product options.
Standards Information
No verified DIN, ISO or British dimensional product standard has been identified specifically for this peeled-body blind rivet design. ISO 15977 should not be assigned because it covers conventional open-end aluminium/steel blind rivets rather than a confirmed peel-type construction.
ISO 14588 and BS EN ISO 14588 provide general blind-rivet terminology. ISO 14589 and BS EN ISO 14589 provide mechanical testing methods for blind rivets, but they do not define the dimensions of this particular peeled-rivet range.
Selection and Installation
Measure the combined thickness of the materials being joined and select a rivet whose recommended grip range covers that measurement. Prepare an approximately 4.1mm diameter hole and use a hand, pneumatic or cordless blind-rivet tool suitable for 4mm rivets.
Browse our complete range of peeled pop rivets, including other aluminium/steel peeled rivets and general pop rivets.
| A | B | C | D | E | F |
| 4.0mm | 12mm | 8mm | 5mm | 8mm | 4.1mm |
| 4.0mm | 16mm | 8mm | 8mm | 1mm | 4.1mm |
| 4.0mm | 25mm | 8mm | 15mm | 20mm | 4.1mm |
| 4.0mm | 20mm | 8mm | 12mm | 15mm | 4.1mm |
Please Note: Specifications given are intended as a guide only. If critical to your project please check with us first.
