Product Description
6.4mm Aluminium/Steel Dome Head Peeled Pop Rivets
6.4mm peeled pop rivets manufactured with an aluminium rivet body and zinc-plated steel break mandrel. These long peel-type blind rivets are designed for fastening thick, soft or low-density materials where a conventional pop rivet may pull through the rear surface.
During installation, the aluminium body splits and peels into separate legs on the blind side of the joint. This produces a larger rear bearing area that helps distribute the clamping load over the material.
Product Features
- Nominal rivet diameter: 6.4mm
- Rivet type: peeled or peel-type blind rivet
- Head style: dome or protruding head
- Body material: aluminium
- Mandrel material: zinc-plated steel
- Available in 35mm and 50mm body lengths
- Grip ranges from 21mm to 40mm
- Head diameter: approximately 12.7mm
- Recommended hole diameter: approximately 6.5mm
- Large blind-side bearing area after installation
- Installed from one side of the workpiece
Suitable Applications
- Thick plastic panels and components
- Wood and timber products
- Composite and laminated materials
- Insulation and lightweight boards
- Automotive trim and interior structures
- Caravans, trailers and vehicle bodywork
- Signage and general fabrication
These peeled rivets are designed to spread the load over a larger blind-side area. They should not be treated as sealed, waterproof or structural rivets unless separately confirmed as suitable for the application.
Available Pack Sizes
Choose from packs of 1, 5, 10, 20, 50, 100, 250, 500 or 1,000 rivets. Select the required rivet length and pack quantity from the product options.
Selection and Installation
Measure the combined thickness of the materials being joined and select a rivet whose recommended grip range covers that measurement. Prepare an approximately 6.5mm diameter hole and use a suitably rated pneumatic, cordless or heavy-duty rivet tool capable of installing 6.4mm blind rivets.
Browse our complete range of peeled pop rivets, including other aluminium/steel peeled rivets and general pop rivets.
| A | B | C | D | E | F |
| 6.4mm | 35mm | 12.7mm | 21mm | 25mm | 6.5mm |
| 6.4mm | 50mm | 12.7mm | 35mm | 40mm | 6.5mm |
Please Note: Specifications given are intended as a guide only. If critical to your project please check with us first.
