Product Description
A2 Stainless Steel Polytech 30 Pan Pozi Screws for Plastic
Polytech 30 pan Pozi screws manufactured from A2 stainless steel for fastening into plastic components. These screws have a non-pointed tip and a pan head that seats above the component surface.
Available in 2.5mm, 3mm, 3.5mm and 4mm diameters. Choose the diameter, length and pack quantity required for your application.
Technical Specifications
| Product Type | Polytech 30 screws for plastics |
|---|---|
| Material | A2 stainless steel |
| Head Style | Pan head |
| Drive Type | Pozi |
| Tip Style | Non-pointed |
Available Sizes and Head Dimensions
| Screw Diameter | Available Lengths | Maximum Head Diameter | Maximum Head Height | Pozi Drive Size |
|---|---|---|---|---|
| 2.5mm | 6mm, 8mm | 4.4mm | 1.7mm | PZ1 |
| 3mm | 6mm, 8mm, 10mm, 12mm, 16mm, 18mm, 20mm | 5.3mm | 2.0mm | PZ1 |
| 3.5mm | 10mm, 12mm, 16mm, 18mm, 20mm, 25mm | 6.1mm | 2.5mm | PZ2 |
| 4mm | 8mm, 10mm, 12mm, 16mm, 18mm, 20mm, 25mm | 7.0mm | 2.7mm | PZ2 |
Suggested Pilot Hole Diameters
| Screw Diameter | Polypropylene | Nylon | Glass-Filled Plastic | Polycarbonate |
|---|---|---|---|---|
| 2.5mm | 1.75mm | 1.87mm | 2.00mm | 2.12mm |
| 3mm | 2.10mm | 2.25mm | 2.40mm | 2.55mm |
| 3.5mm | 2.45mm | 2.62mm | 2.80mm | 2.97mm |
| 4mm | 2.80mm | 3.00mm | 3.20mm | 3.40mm |
Suggested hole diameters are starting points. Confirm suitability by testing in the actual plastic grade and component, allowing for wall thickness, hole depth and installation torque.
Measuring and Fitting
Screw length is measured from beneath the pan head to the tip, excluding the head. Use the correct Pozi bit and a suitably prepared pilot hole. Tighten carefully to avoid damaging the plastic or stripping the formed thread.
