Product Description
M3 A2 Stainless Steel Cone Point Socket Grub Screws — DIN 914 / ISO 4027
These M3 cone point grub screws are manufactured from A2 stainless steel for good general corrosion resistance. They feature a standard M3 x 0.5mm metric thread and an internal hexagon socket for a 1.5mm Allen key.
The headless design allows the screw to sit flush with or below the surrounding surface. The pointed cone end provides concentrated contact for locating and securing components such as collars, knobs and small mechanical assemblies, particularly where a matching locating recess is provided.
Technical Specifications
| Thread size | M3 |
|---|---|
| Nominal thread diameter | 3mm |
| Thread pitch | 0.5mm |
| Thread type | Metric coarse |
| Material | A2 stainless steel |
| Standards | DIN 914 / ISO 4027 |
| Screw type | Headless socket set screw / grub screw |
| Point style | Cone point |
| Drive type | Internal hexagon socket |
| Allen key size | 1.5mm |
| Length measurement | Overall end-to-end length, including the cone point |
Available Sizes
| Thread Size | Overall Length | Allen Key Size |
|---|---|---|
| M3 x 0.5mm | 3mm | 1.5mm |
| M3 x 0.5mm | 5mm | 1.5mm |
| M3 x 0.5mm | 8mm | 1.5mm |
| M3 x 0.5mm | 10mm | 1.5mm |
| M3 x 0.5mm | 12mm | 1.5mm |
| M3 x 0.5mm | 16mm | 1.5mm |
| M3 x 0.5mm | 20mm | 1.5mm |
| M3 x 0.5mm | 25mm | 1.5mm |
| M3 x 0.5mm | 30mm | 1.5mm |
Available Pack Quantities
Select the required length and pack quantity from the product options. Packs available: 2, 5, 10, 20, 50, 100, 250, 500 and 1000.
Fitting Information
Install into a matching M3 x 0.5mm tapped hole using a correctly fitting 1.5mm Allen key. Keep the key fully engaged and tighten to the requirements of the assembly.
The cone point can indent or mark the mating surface. Where accurate positioning is required, use a suitably prepared locating recess. Choose a length that provides adequate thread engagement while allowing the point to contact the component being secured.
