Product Description
4mm A2 Stainless Steel Countersunk Torx Chipboard Screws
These 4mm chipboard screws feature A2 stainless steel construction, a countersunk head and a TX20 Torx drive. Suitable for chipboard and other wood materials, they provide a corrosion-resistant fastening option for furniture assembly, cabinetry, repairs and general woodworking.
The countersunk head allows a flush finish when correctly seated. A matching TX20 driver bit engages the six-lobe recess for controlled installation.
Product Specifications
| Material | A2 stainless steel |
|---|---|
| Nominal Screw Diameter | 4mm |
| Head Type | Countersunk / flat head |
| Drive Type | Torx / six-lobe |
| Driver Size | TX20 |
| Application | Chipboard and other wood materials |
| Length Measurement | Overall length, including the head |
Available Sizes
| Nominal Diameter | Overall Length | Driver Size |
|---|---|---|
| 4mm | 16mm | TX20 |
| 4mm | 20mm | TX20 |
| 4mm | 25mm | TX20 |
| 4mm | 30mm | TX20 |
| 4mm | 35mm | TX20 |
| 4mm | 40mm | TX20 |
| 4mm | 45mm | TX20 |
| 4mm | 50mm | TX20 |
| 4mm | 60mm | TX20 |
| 4mm | 70mm | TX20 |
Head Dimensions
Reference dimensions for the 4mm countersunk Torx chipboard screw head:
- Head diameter: 7.64–8.00mm
- Nominal head height: 2.35mm
- Drive: TX20
Installation and Measuring
Select a length that provides suitable engagement without passing through the opposite face. A suitable pilot hole is advisable in hardwood, near edges or where splitting is a concern.
Use a correctly fitting TX20 bit and control the final tightening to seat the head without damaging the board. Screw length is measured from the top of the countersunk head to the tip.
Select the required length and pack quantity using the product options.