Product Description
3.5mm A2 Stainless Steel Countersunk Torx Chipboard Screws
These 3.5mm chipboard screws combine A2 stainless steel construction with a countersunk head and TX10 Torx drive. Suitable for chipboard and other wood materials, they provide a corrosion-resistant fastening option for cabinetry, furniture assembly, repairs and general woodworking.
The countersunk head allows a flush finish when correctly seated. A matching TX10 driver bit engages the six-lobe recess for controlled installation.
Product Specifications
| Material | A2 stainless steel |
|---|---|
| Nominal Screw Diameter | 3.5mm |
| Head Type | Countersunk / flat head |
| Drive Type | Torx / six-lobe |
| Driver Size | TX10 |
| Application | Chipboard and other wood materials |
| Length Measurement | Overall length, including the head |
Available Sizes
| Nominal Diameter | Overall Length | Driver Size |
|---|---|---|
| 3.5mm | 16mm | TX10 |
| 3.5mm | 20mm | TX10 |
| 3.5mm | 25mm | TX10 |
| 3.5mm | 30mm | TX10 |
| 3.5mm | 35mm | TX10 |
| 3.5mm | 40mm | TX10 |
| 3.5mm | 50mm | TX10 |
Head Dimensions
Reference dimensions for the 3.5mm countersunk Torx chipboard screw head:
- Head diameter: 6.64–7.00mm
- Nominal head height: 2.00mm
- Drive: TX10
Installation and Measuring
Select a length that provides suitable engagement without passing through the opposite face. A suitable pilot hole is advisable in hardwood, near edges or where splitting is a concern.
Use a correctly fitting TX10 bit and control the final tightening to seat the head without damaging the board. Screw length is measured from the top of the countersunk head to the tip.
Select the required length and pack quantity using the product options.
