Product Description
8mm A2 Stainless Steel Countersunk Torx Chipboard Screws
These 8mm chipboard screws feature A2 stainless steel construction, a countersunk head and a Torx drive. Suitable for chipboard and other wood materials, they provide a corrosion-resistant fastening option for timber assembly, joinery, repairs and general woodworking.
The countersunk head allows a flush finish when correctly seated. The six-lobe Torx recess provides positive engagement with a matching driver bit.
Product Specifications
| Material | A2 stainless steel |
|---|---|
| Nominal Screw Diameter | 8mm |
| Head Type | Countersunk / flat head |
| Drive Type | Torx / six-lobe |
| Application | Chipboard and other wood materials |
| Length Measurement | Overall length, including the head |
Available Sizes
| Nominal Diameter | Overall Length |
|---|---|
| 8mm | 60mm |
| 8mm | 70mm |
| 8mm | 80mm |
| 8mm | 90mm |
| 8mm | 100mm |
| 8mm | 120mm |
| 8mm | 140mm |
| 8mm | 180mm |
| 8mm | 200mm |
Selecting the Correct Length
Choose a length that provides suitable engagement in the receiving timber without passing through the opposite face. Allow for the thickness of the component being attached and the depth available for the screw.
Installation and Measuring
Prepare a suitable pilot hole for the timber and screw diameter, particularly in hardwood or near edges and ends. Use a Torx bit that fits the recess fully and securely.
Control the final tightening to seat the countersunk head without damaging the timber. Screw length is measured from the top of the head to the tip.
Select the required length and pack quantity using the product options.
