Product Description
M6 Class 12.9 Self Colour Socket Cap Bolts – Part Threaded DIN 912
These M6 socket cap bolts are manufactured from class 12.9 high tensile steel with a self colour finish. Their part threaded construction provides a plain shank beneath the head for assemblies requiring an unthreaded section through the components being joined.
The M6 x 1mm metric coarse thread fits matching nuts and tapped holes. The cylindrical head contains a 5mm internal hexagon socket for installation with an Allen key or hex driver.
Specifications
| Product type | Part threaded socket head cap bolt |
|---|---|
| Material | High tensile steel |
| Property class | 12.9 |
| Finish | Self colour, without zinc plating |
| Nominal thread diameter | M6 |
| Thread pitch | 1mm – metric coarse |
| Thread coverage | Part threaded, with a plain shank |
| Head style | Cylindrical socket cap head |
| Drive size | 5mm internal hexagon |
| Nominal head diameter | 10mm |
| Maximum diameter over head knurling | 10.22mm |
| Maximum head height | 6mm |
| Length measurement | Measured from beneath the head to the end of the bolt |
Key Features
- Class 12.9 high tensile steel construction.
- Part threaded design with a plain shank.
- M6 x 1mm metric coarse thread.
- 5mm Allen key socket drive.
- DIN 912 / ISO 4762 socket cap pattern.
Typical Applications
Suitable for machinery, tooling, fixtures and equipment repairs where M6 class 12.9 socket cap bolts with a plain shank are specified.
Installation
Use compatible nuts of an appropriate property class or a suitable tapped hole. Ensure sufficient thread engagement and position the plain shank as required by the joint design. Fully engage the 5mm hex driver and tighten to the equipment manufacturer's specification, accounting for lubrication and surface condition.
Self colour steel may require additional corrosion protection in damp or exposed environments.
Ordering
Select the required bolt length and pack quantity from the available options. Length excludes the head. Threaded and plain shank lengths vary with bolt length; check these dimensions where critical to the assembly.
Standards
- DIN 912 / ISO 4762 – hexagon socket head cap screw dimensional pattern.
- ISO 898-1 – mechanical properties of steel fasteners, property class 12.9.