Product Description
Brass Raised Countersunk Slotted Machine Screws – M3, M4 and M5
Solid brass metric machine screws with a raised countersunk head and traditional slotted drive. The DIN 964 head seats into a countersunk hole while leaving a gently domed top visible above the surface.
Suitable for decorative fittings, restoration work, instrument panels and general assemblies using matching metric nuts or tapped holes.
Specifications
| Material | Solid brass |
|---|---|
| Head type | Raised countersunk / oval head |
| Drive | Slotted – flat-blade screwdriver |
| Thread type | Metric coarse |
| Thread sizes | M3, M4 and M5 |
| Standard | DIN 964 |
Thread Pitches and Available Lengths
| Thread Size | Pitch | Lengths Available |
|---|---|---|
| M3 | 0.5mm | 5, 8, 10, 12, 16, 20, 25, 30, 35 and 40mm |
| M4 | 0.7mm | 10, 12, 16, 20, 25, 30, 35 and 40mm |
| M5 | 0.8mm | 12, 16, 20, 25, 30, 35 and 40mm |
Key Features
- Solid brass construction with a traditional appearance.
- Raised countersunk head provides a decorative domed finish.
- Slotted drive for installation with a suitable flat-blade screwdriver.
- Three metric thread sizes with a choice of lengths.
Selection and Installation
Choose the correct diameter, pitch and length for the assembly. Raised countersunk screw length is measured to the countersunk seating plane, excluding the raised dome. Use a screwdriver blade that fits the slot closely and avoid overtightening.
Pack Sizes and Ordering
Available in packs of 5, 10, 20, 50, 100, 250, 500 or 1000. Select the required thread size, length and pack quantity from the available options.
Standards
DIN 964 – slotted raised countersunk head machine screws.
| A | B | C | D |
| 3mm | 40mm | 5.5mm | 0.5 |
| 3mm | 35mm | 5.5mm | 0.5 |
| 3mm | 10mm | 5.5mm | 0.5 |
| 3mm | 20mm | 5.5mm | 0.5 |
| 3mm | 25mm | 5.5mm | 0.5 |
| 3mm | 12mm | 5.5mm | 0.5 |
| 3mm | 16mm | 5.5mm | 0.5 |
| 3mm | 30mm | 5.5mm | 0.5 |
| 3mm | 5mm | 5.5mm | 0.5 |
| 3mm | 8mm | 5.5mm | 0.5 |
| 4mm | 10mm | 7.3mm | 0.7 |
| 4mm | 40mm | 7.3mm | 0.7 |
| 4mm | 35mm | 7.3mm | 0.7 |
| 4mm | 25mm | 7.3mm | 0.7 |
| 4mm | 12mm | 7.3mm | 0.7 |
| 4mm | 16mm | 7.3mm | 0.7 |
| 4mm | 30mm | 7.3mm | 0.7 |
| 4mm | 20mm | 7.3mm | 0.7 |
| 5mm | 35mm | 9mm | 0.8 |
| 5mm | 40mm | 9mm | 0.8 |
| 5mm | 12mm | 9mm | 0.8 |
| 5mm | 16mm | 9mm | 0.8 |
| 5mm | 25mm | 9mm | 0.8 |
| 5mm | 20mm | 9mm | 0.8 |
| 5mm | 30mm | 9mm | 0.8 |
Please Note: Specifications given are intended as a guide only. If critical to your project please check with us first.
