Product Description
White Nylon Penny Repair Washers – M4 to M12
White nylon penny repair washers with a wide, flat profile. The large outside diameter spreads the fastening load over a broader area and helps protect the contacting surface beneath a screw head or nut.
Specifications
| Product type | Penny / repair washer |
|---|---|
| Material | Nylon |
| Colour | White |
| Profile | Flat with large outside diameter |
| Nominal sizes | M4, M5, M6, M8, M10 and M12 |
Available Sizes and Dimensions
| Nominal Fastener Size | Outside Diameter | Thickness |
|---|---|---|
| M4 | 12mm | 1.05mm |
| M5 | 15mm | 1.35mm |
| M6 | 18mm | 1.60mm |
| M8 | 24mm | 2.08mm |
| M10 | 30mm | 2.55mm |
| M12 | 40mm | 3.00mm |
Dimensions are approximate guides. The M-size identifies the matching nominal fastener size, rather than the measured washer bore.
Key Features
- Wide bearing area for load distribution.
- Lightweight nylon construction.
- Helps separate metal fasteners from the contacting surface.
- Six metric sizes for assembly and repair work.
Selection and Installation
Check the bore clearance, outside diameter and thickness against the assembly requirements. Tighten appropriately for the nylon washer and supporting material to avoid excessive compression.
Pack Sizes
Available in packs of 5, 10, 20, 50, 100 or 250. Select the required size and quantity from the options above.
Standards and Pattern Reference
DIN 34816 large-series plastic washer pattern. Use the dimensions listed above when selecting this range.
