Product Description
No.2 non-pointed Type B pan head Pozi self tapping screws manufactured from steel with a bright zinc plated finish.
These small-diameter self tapping screws have a blunt, non-pointed end and a Type B thread form. They are suitable for fastening into pre-drilled holes in thin sheet metal, plastics and other suitable materials where a sharp-pointed screw is not required.
- Screw size: No.2 / approximately 2.2mm diameter
- Screw type: Non-pointed Type B self tapping screw
- Head style: Pan head
- Drive type: Pozi
- Material: Steel
- Finish: Bright zinc plated / BZP
- Lengths available: 3/16", 1/4", 5/16" and 3/8"
- Approximate metric lengths: 4.5mm, 6mm, 8mm and 9.5mm
- Approximate head diameter: 4.2mm
- Approximate head height: 1.8mm
- Pack sizes available: 10, 20, 50, 100, 250, 500 and 1000
| Screw Size | Nominal Diameter | Imperial Length | Approx. Metric Length | Head Diameter | Head Height |
|---|---|---|---|---|---|
| No.2 | 2.2mm | 3/16" | 4.5mm | 4.2mm | 1.8mm |
| No.2 | 2.2mm | 1/4" | 6mm | 4.2mm | 1.8mm |
| No.2 | 2.2mm | 5/16" | 8mm | 4.2mm | 1.8mm |
| No.2 | 2.2mm | 3/8" | 9.5mm | 4.2mm | 1.8mm |
A correctly sized pilot hole is required because these screws have a blunt, non-pointed end. The required pilot-hole diameter will depend on the material type, material thickness and required thread engagement.
Length is measured from underneath the pan head to the end of the screw.
