Product Description
No.10 zinc plated pan pozi head self tapping screws, manufactured from steel with a zinc plated finish for general corrosion resistance. These Type AB self tappers are designed to form their own thread in suitable pre-drilled holes and are commonly used for sheet metal, plastic, light fabrication, repair work and general assembly.
The pan head gives a neat raised finish with a wide bearing surface, while the Pozi drive allows good tool engagement during installation. These screws are listed to DIN 7981 and are available in No.10 diameter with length options from 3/8" to 2".
- No.10 self tapping screws
- Pan head with Pozi drive
- Zinc plated steel
- Type AB self tapping thread
- DIN 7981
- Available in multiple imperial lengths
- Pack sizes available from small quantities to bulk packs
Also known as pan head self tappers, Pozi self tapping screws, No.10 self tappers and DIN 7981 tapping screws.
| A | B | C | D | E | F | G | H |
| No.10 | 4.8mm | 1 1/2" | 38mm | 3/8" | 9.5mm | 9/64" | 3.55mm |
| No.10 | 4.8mm | 1 3/4" | 43mm | 3/8" | 9.5mm | 9/64" | 3.55mm |
| No.10 | 4.8mm | 1" | 25mm | 3/8" | 9.5mm | 9/64" | 3.55mm |
| No.10 | 4.8mm | 1/2" | 13mm | 3/8" | 9.5mm | 9/64" | 3.55mm |
| No.10 | 4.8mm | 2" | 50mm | 3/8" | 9.5mm | 9/64" | 3.55mm |
| No.10 | 4.8mm | 3/4" | 19mm | 3/8" | 9.5mm | 9/64" | 3.55mm |
| No.10 | 4.8mm | 3/8" | 9.5mm | 3/8" | 9.5mm | 9/64" | 3.55mm |
| No.10 | 4.8mm | 5/8" | 16mm | 3/8" | 9.5mm | 9/64" | 3.55mm |
Please Note: Specifications given are intended as a guide only. If critical to your project please check with us first.
