Product Description
170 Piece M6 Zinc Plated Flange Bolt, Nut and Washer Assortment
This 170 piece M6 fastener assortment combines class 8.8 flange bolts in four lengths with plain flange nuts, flange nyloc nuts and large diameter repair washers. Supplied in a clear plastic box with a clip-down lid, it provides a practical selection for workshop repairs, maintenance and general assembly.
The bolts and nuts use an M6 x 1mm metric coarse thread. Bolt lengths range from 16mm to 30mm, giving a choice of lengths for different component thicknesses.
Kit Contents
| Component | Size | Quantity |
|---|---|---|
| Flange bolts | M6 x 16mm | 20 |
| Flange bolts | M6 x 20mm | 15 |
| Flange bolts | M6 x 25mm | 15 |
| Flange bolts | M6 x 30mm | 10 |
| Flange nyloc nuts | M6 | 30 |
| Plain flange nuts | M6 | 30 |
| Repair washers | M6 fit x 25mm outside diameter | 30 |
| Repair washers | M6 fit x 30mm outside diameter | 20 |
| Total fasteners | 170 | |
Specifications
| Nominal thread size | M6 |
|---|---|
| Thread pitch | 1mm – metric coarse |
| Bolt material | High tensile steel |
| Bolt property class | 8.8 |
| Finish | Zinc plated |
| Bolt head style | Hexagon flange head |
| Bolt length measurement | Measured from beneath the flange to the end of the bolt |
| Storage | Clear plastic box with clip-down lid |
Key Features
- 170 fasteners covering bolts, nuts and repair washers.
- Four M6 bolt lengths: 16mm, 20mm, 25mm and 30mm.
- Class 8.8 high tensile steel bolts.
- Choice of plain flange nuts and nylon insert flange locking nuts.
- Two repair washer diameters for a wider bearing area where required.
- Clear storage box keeps the assortment together.
Typical Applications
Suitable for brackets, equipment repairs, workshop projects and general M6 assemblies. Select the bolt length, nut type and washer arrangement to suit the joint requirements.
Installation
Ensure adequate thread engagement and tighten to the assembly specification. When using a nyloc nut, the bolt must engage fully through the nylon locking insert. Check that the selected fasteners and bearing surfaces are suitable for the intended load and operating conditions.
Ordering
The contents table describes the listed 170 piece assortment. Check the selected product option before adding the kit to your basket.
Standards
Bolt property class reference: ISO 898-1, class 8.8. Specific dimensional standards for the bolts, nuts and washers have not been verified for this kit.
