Product Description
106 Piece M8 Zinc Plated Flange Bolt, Nut and Washer Assortment
This 106 piece M8 assortment combines class 8.8 flange bolts in five lengths with plain flange nuts, flange nyloc nuts and repair washers. Supplied in a clear plastic box with a clip-down lid, it keeps a useful selection of M8 fixings together for workshop repairs and general assembly.
The bolts and nuts use an M8 x 1.25mm metric coarse thread. Bolt lengths range from 16mm to 40mm to accommodate different component thicknesses.
Kit Contents
| Component | Size | Quantity |
|---|---|---|
| Flange bolts | M8 x 16mm | 10 |
| Flange bolts | M8 x 20mm | 10 |
| Flange bolts | M8 x 25mm | 10 |
| Flange bolts | M8 x 30mm | 8 |
| Flange bolts | M8 x 40mm | 5 |
| Flange nyloc nuts | M8 | 20 |
| Plain flange nuts | M8 | 23 |
| Repair washers | M8 fit x 25mm outside diameter | 20 |
| Total fasteners | 106 | |
Specifications
| Nominal thread size | M8 |
|---|---|
| Thread pitch | 1.25mm – metric coarse |
| Bolt material | High tensile steel |
| Bolt property class | 8.8 |
| Finish | Zinc plated |
| Bolt head style | Hexagon flange head |
| Bolt length measurement | Measured from beneath the flange to the end of the bolt |
| Storage | Clear plastic box with clip-down lid |
Key Features
- 106 fasteners covering flange bolts, nuts and repair washers.
- Five bolt lengths: 16mm, 20mm, 25mm, 30mm and 40mm.
- Class 8.8 high tensile steel bolts.
- Choice of plain flange nuts and nylon insert flange locking nuts.
- 25mm outside diameter repair washers for a wider bearing area where required.
- Clear storage box keeps the assortment together.
Typical Applications
Suitable for brackets, machinery maintenance, workshop projects and equipment repairs requiring M8 fasteners. Select the bolt length, nut type and washer arrangement to suit the assembly.
Installation
Ensure adequate thread engagement and tighten to the assembly specification. When fitting a nyloc nut, the bolt must engage fully through the nylon locking insert. Check that the selected components are suitable for the intended load and operating conditions.
Ordering
The contents table describes the listed 106 piece assortment. Check the selected product option before adding the kit to your basket.
Standards
Bolt property class reference: ISO 898-1, class 8.8. Specific dimensional standards for the bolts, nuts and washers have not been verified for this kit.
