Product Description
M10 Metric Masonry Shield Anchor Studs with Anti-Vandal Shear Nuts
These M10 masonry shield anchor studs combine a four-way expansion shield with an anti-vandal shear nut for tamper-resistant fixing into suitable masonry and concrete. Each assembly includes the shield, threaded stud and shear nut.
The shear nut is designed so that its driving section breaks away during final tightening, leaving a smooth security section that is difficult to grip with conventional tools. This makes the fixing suitable for installations where routine removal is not required.
Technical Specifications
| Product Type | Shield anchor stud with security shear nut |
|---|---|
| Thread Size | M10 |
| Nominal Thread Diameter | 10 mm |
| Listed Length | 95 mm |
| Expansion Type | Four-way expansion shield |
| Finish | Yellow passivated |
| Nut Type | Anti-vandal shear nut |
| Intended Base Materials | Suitable masonry and concrete, subject to installation requirements |
| Included Components | Shield, stud and shear nut |
Available Size
| Thread Size | Listed Length |
|---|---|
| M10 | 95 mm |
Selecting Your Anchor
Select the required pack size from the available options. Check the base material, fixture thickness and installation requirements before ordering. The M10 designation refers to the stud thread diameter, not the required drill diameter.
These fixings are intended for applications requiring resistance to unauthorised removal. Position and align the fixture before final tightening, as the shear nut is not designed for routine removal once its driving section has broken away.
Please note: Confirm the required drill diameter, hole depth, embedment, edge distances and installation procedure before fitting. Load capacity depends on the base material and installation; no load rating is stated here.
